About the data

First gyrotron in ITER's additional order reaches 1 MW in a short pulse

QST reported in its November 19 bulletin that the first of 20 additional ITER heating gyrotrons reached 1 MW during short-pulse testing at Naka in October. The test is distinct from sustained operation, delivery or heating ITER's plasma.

Published Updated Translation reviewed
Share this article
Read the Japanese original

Announcement date:2026-11-19

Japanese gyrotron at ITER surrounded by blue cooling hoses with a staff member. Published in 2025; not the additional unit tested at QST's Naka site in October 2026.
Japanese gyrotron installed at ITER (September 2025 archival photograph)© ITER Organization, https://www.iter.org/ · Image usage termsA real Japanese gyrotron installed at ITER and photographed in 2025. This is not the first additional unit whose short-pulse output was measured at Naka in October 2026.

The first gyrotron from an additional order of 20 units for ITER's plasma heating system has entered testing. In the November 19 edition of Weekly Fusion, QST reported that the unit achieved a 1 MW output in a short pulse at its Naka site in October. How can the progress of a large equipment order be measured?

The device is a high-power microwave source intended for ITER's electron cyclotron heating system. QST said it began tests of the first unit, checked the microwave beam pattern at its output window and then verified 1 MW under short-pulse conditions. The test was conducted in October 2026; November 19 was the bulletin's publication date, not the day of the experiment.

A gyrotron generates millimetre waves using the motion of electrons and directs their energy toward electrons in a plasma. The operational requirements extend beyond power output to pulse duration, beam transmission quality, cooling and integration. Reaching 1 MW in a short pulse confirms one element of performance. It does not show sustained rated power, completion of all 20 units, their delivery to ITER or plasma heating at the reactor.

Reporting a measured value for the first additional unit shows progress from manufacturing toward individual equipment qualification. The remaining questions include sustained testing, acceptance checks, transfer and integration. FI's gyrotron and RF-heating explainer covers the device and its previous ITER deployment.

Sources and primary documents

Information checked as of:2026-11-22
The 1 MW test was a short pulse at QST Naka in October 2026. It is not evidence of long-pulse rated performance, completion of the 20-unit order or ITER plasma heating.

Share this article

Discuss this article